Installing tetherball




















Place anchor nuts and washers on anchor bolts and tighten once pole is plumb. Place 6 inches of gravel in the bottom of your hole for drainage. Place the metal post so it sits securely in the bottom of the hole atop the gravel and is centered.

Shovel or pour 8 to 10 inches of gravel into the hole around the post. Standard tetherball fouls: Hitting the ball with any body part other than your hands or forearms. Touching the rope with your hands or forearm.

Hitting the ball more than once per wrap around the pole is not permitted unless the ball touches the opponent or the pole. In California, where playground owners have until to comply, swings must be removed from many preschools. No other state has gone so far. Red Rover. One theory is that the game, with its distinctive chant, was named after an steamboat that took passengers back and forth across the Hatchie River.

Another suggests it was a taunt early English children directed at Viking invaders. The extra weight helps, especially when bush-hogging, and eliminates the need for front weights. Another benefit of the concrete is that it reinforced the wheels, which were in bad shape.

A: Water can cause problems. As the tire heats up, the water expands faster than the air. If your car has a tire-pressure monitoring system, water can damage the transmitters in the wheels. Press the inflater valve for a few seconds to dispel any water in the hose before filling your tires. This sport can burn upwards of calories for a pound person. Attach the tetherball to the top of the pole with the clip.

The ball must hang three to four inches off the ground. Pamela Gardapee is a writer with more than seven years experience writing Web content. Being functional in finances, home projects and computers has allowed Gardapee to give her readers valuable information.

She studied accounting, computers and writing before offering her tax, computer and writing services to others. Items you will need Bag of cement Tetherball pole Tetherball Mounting clip to attach the tetherball to the pole Level Post hole digger. Insert the tetherball pole into the cement. Use the level to make sure that the pole is level. Writer Bio Pamela Gardapee is a writer with more than seven years experience writing Web content.

As with using any power tool, make sure to use proper protective equipment while drilling through the poles to avoid injury. Once all your holes are drilled, you can install the eye bolt. Push the eye bolt through the hole in the top of the pole and out the other side.

Use the washer and hex nut to secure the eye bolt in place. For an in-ground tetherball pole, you will need a hole in the ground, which will be filled with concrete to hold the pole in place. A post-hole digger can speed up this process if you have access to one. You may be fine without the rebar on an in-ground install. For tire-mounted or in-ground installation, the next step is to install the rebar. Insert the two pieces of rebar into the two holes you drilled at the bottom of the pole.

The rebar will help to stabilize the pole in the concrete. After the rebar is inserted, we recommend wrapping a length of safety wire around both pieces of rebar and the pole to stop them from shifting out of place.

Concrete can dry quickly, especially on hot and dry days. Gloves and eye protection will keep you safe from skin and eye irritation that can come from wet concrete or concrete powder, while a mask is recommended to prevent unintentional inhalation of dangerous powder particles.

It is useful to have someone to help you hold the pole in place while you do this, but an alternative would be to use some scrap wood and vise clamps to hold the pole. As you work, frequently check to be sure your pole is held straight. A spirit level is useful to confirm this since it can be hard to see if the pole is tilted when you are close to it.

Just tie the pole to the ladder with zip-ties or string. Fill the hole or tire with additional concrete, making sure you reach the outside edges, until the hole or tire is full.

The amount of time it takes for the concrete to dry completely will depend on the type of concrete and the weather conditions. Make sure that the pole is not moved before the concrete is completely dry since that could cause it to be less stable. That makes it easier to mow the yard or store the pole for winter. A ladder may be necessary to attach the rope, depending on how tall the tetherball pole is.

If you would like to mark the court and boundaries, check out my Tetherball Court Dimensions article for a free print out diagram to help you lay the court out. There are several types of tetherballs available from sporting goods stores and online. Without having used each one, it can be challenging to decide which is the right choice.

Here are some considerations when thinking of which tetherball to buy.



0コメント

  • 1000 / 1000